G-Tamarta JPS200V5-A Qufulka AC ilaa DC Beddelka 110V/220V Gelida Xayeysiiska Shaashada LED
Tilmaamaha ugu weyn ee Alaabta
Awoodda wax soo saarka (W) | Gelitaanka la qiimeeyay Voltage (Vac) | Wax soo saarka la qiimeeyay Voltage (Vdc) | Soo-saarka Hadda Range (A) | Saxnaanta | Ripple iyo Sawaxan (mVp-p) |
200 | 110/200 | +5.0 | 0-40.0 | ± 2% | ≤200 |
Xaalada Deegaanka
Shayga | Sharaxaada | Tech Spec | Unug | Odhaah |
1 | Heerkulka shaqada | -30-60 | ℃ |
Fadlan tixraac
"heerkulka
qalooca hoos u dhaca" |
2 | Kaydinta heerkulka | -40-85 | ℃ | |
3 | Qoyaanka qaraabada | 10-90 | % | Uumiye |
4 | Habka kuleylka kuleylka | Hawo qaboojin |
|
|
5 | Cadaadiska hawada | 80- 106 | Kpa |
|
6 | Dhererka heerka badda | 2000 | m |
Dabeecadda Korontada
1 | Jilaa wax gal | ||||
Shayga | Sharaxaada | Tech Spec | Unug | Odhaah | |
1.1 | danab lagu qiimeeyay | 110/220 | Vac |
| |
1.2 | Kala duwanaanshaha soo noqnoqda soo-gelinta | 47-63 | Hz |
| |
1.3 | Waxtarka | ≥87.0 (220VAC) | % | Soo saarida culeys buuxa (heerkulka qolka) | |
1.4 | Qodobka waxtarka leh | ≥0.5 |
| Voltage gelinta la qiimeeyay, soo saarida culeys buuxa | |
1.5 | gelinta ugu badan ee hadda | ≤3.5 | A |
| |
1.6 | Dash hadda | ≤120 | A | Imtixaanka qabowga @220Vac | |
2 | Dabeecadda wax soo saarka | ||||
Shayga | Sharaxaada | Tech Spec | Unug | Odhaah | |
2.1 | Qiimaynta danabka soo baxay | +5.0 | Vdc |
| |
2.2 | Kala duwanaanshaha hadda jira | 0-40.0 | A |
| |
2.3 | Korontada wax soo saarka la hagaajin karo kala duwan | Aan la hagaajin karin | Vdc |
| |
2.4 | Kala duwanaanshaha danabka soo baxay | ±2 | % |
| |
2.5 | Nidaaminta rarka | ±2 | % |
| |
2.6 | Xaqiijinta xasilloonida korantada | ±2 | % |
| |
2.7 | Duufaan iyo sawaxan soo baxay | ≤200 | mVp-p | galinta la qiimeeyay, wax soo saarka culeys buuxa, 20MHz bandwidth, dhinaca load iyo 47uf/104 capacitor | |
2.8 | Bilow daahitaanka wax soo saarka | ≤3.5 | S | Vin=220Vac @25℃ imtixaan | |
2.9 | Korantada wax soo saarka waqtiga kor u qaadista | ≤100 | ms | Vin=220Vac @25℃ imtixaan | |
2.10 | Beddelka mashiinka xad dhaafka ah | ±5 | % | Tijaabi xaaladaha: culays buuxa, Habka CR | |
2.11 | Wax soo saarka firfircoon | Isbeddelka tamarta ayaa ka yar ± 10% VO;firfircoonida waqtiga jawaabta waa in ka yar 250us | mV | KORDHA 25% -50% -25% 50% -75% -50% | |
3 | Dabeecada ilaalinta | ||||
Shayga | Sharaxaada | Tech Spec | Unug | Odhaah | |
3.1 | Gelida koronto yar ilaalinta | (75-85)/110 (155-185)/220 | VAC | Xaaladaha tijaabada: rar buuxa | |
3.2 | Gelida koronto yar barta soo kabashada | (75-85)/110 (155-185)/220 | VAC | ||
3.3 | Xadaynta hadda jirta barta ilaalinta | 48-65 | A |
| |
3.4 | Soo saarida wareegga gaaban ilaalinta | Is-kabashada | A | HI-CUP hiccupsdib u soo kabashada, iska ilaalidhaawac muddo dheer ahawood ka dib a awoodda wareegga gaaban. | |
3.5 | Ilaalinta danab ka badan | / | V | ||
4 | Dabeecad kale | ||||
Shayga | Sharaxaada | Tech Spec | unug | Odhaah | |
4.1 | MTBF | ≥40,000 | H |
| |
4.2 | Ka Daadashada Hadda | 10 (Vin=230Vac) | mA | GB8898-2001 habka tijaabada |
Tilmaamaha U Hogaansanaanta Wax-soo-saarka
Shayga | Sharaxaada | Tech Spec | Odhaah | |
1 | Xoogga Korontada | Gelida soo saarista | 3000Vac/10mA/1daqiiqo | Ma jiro qaniinyo, ma jabna |
2 | Xoogga Korontada | Gelida dhulka | 1500Vac/10mA/1daqiiqo | Ma jiro qaniinyo, ma jabna |
3 | Xoogga Korontada | Wax soo saarka dhulka | 500Vac/10mA/1daqiiqo | Ma jiro qaniinyo, ma jabna |
Qalooca Xogta Qaraabo
Xiriirka ka dhexeeya heerkulka deegaanka iyo culeyska
Korontada gelinta iyo qalooca korantada culeyska
Load iyo qalooca hufnaanta
Dabeecadda farsamada iyo qeexida xirayaasha (cutubka:mm)
Cabirka: dhererka× ballac ahaan× joog=190×82×30±0.5.
Godadka Golaha
Feejignaanta Codsiga
1. Isticmaalka badbaado leh, si looga fogaado xidhiidhka kulaylka, taasoo keentay shoog koronto.
2,Koronto-sare oo gudaha ah, fadlan ha furin ilaa xirfadlayaal mooyaane
3,Waa in si toosan loo rakibaa, si toos ah ama toosan lama ogola
4,Ka fogee walxaha 10 sentimitir si ay isu rogaan